How to build a computer

The needs of computer are increasing rapidly. Having a computer like having a friends, so we have to consider how the friend is. Making friends with good people, we are good people, and so does the computer. If we have a good computer, a good real friend it will help us solve a lot of tasks, works that we get from school. So, why don’t we make a good computer of our own instead of bying one in computer store. That thing worths a try. It is funny and help us save a loat of money. By doing this we will know more about our friends.Following these steps below will make you find it easy.
First, we need to prepare the components and tools. To build a basic PC, we will need at least a motherboard, a memory module, a processor with cooling fan, a power supply, a hard drive, a floppy drive, a video card and a CD-ROM. It is easy to find these components in most of the computer stores. If we want our computer to run well, good qualities of the components are needed. Most sensitive hardware comes in a static bag which is designed to protect the electronics from static electricity shock. Leave your hardware in these bags until you are ready to install them. When everything is in order, we begin to build our own computers.
The process of assembling parts of a computer requires two easy steps. he first step is installing some components in the hardware. First, we have to remove the case cover and have a case preparation. Second , install the power supply. Take the power supply unit and line it up for placement into the PC case. The fan should blow toward the rear and the wires should face forward. Insert the PSU into the case, and make sure the holes on the rear of the PSU line up with the screw holes on the case. If they do not, you may need to turn the power supply over. Using screws to secure it. Third, installing the CPU is a pretty straight-forward process. The real risk is to the CPU. Doing this step too fast or carelessly can result in damage to the processor. Therefore, don’t get nervous. It is an easy step, but do it with care :” Check the pins, open ZIF socket, orient the chip and insert processor.” When done, there should be basically no gap between the bottom of the processor and the socket. The next step is install the heat fan. Today’s processors are running quite hot and it used to be that you could attach a heat sink and fan to your processor directly and not worry about it. Next, configure the motherboard, install the motherboard, an then connect it to the case. When we all finish the first step, move on the second. This tep is installing some components inside the case. All we need here are : configure the hard drive and CD rom, install drive and Cd rom and then install the viedo card. When everything is ok, test the system and then install the operating system. Okay, it is time to install our operating system. This is the final step necessary to make your new PC a fully workable PC.
The computer is now waiting for us, click the button on the case to activate it.This is the final step to have a workable PC. All we do is complete the setting and load the operating system. Making a PC of our own is funny, also we can save a lot of money. It is worth trying.